Inflation Fan Operation
The
fan is one of the most dangerous items on
the launch field. It needs to be handled with great care.
-
The pilot will place and start the fan.
-
Know
where the kill switch and speed
controls are located.
-
Tie
back long hair and secure loose
clothing, lanyards, or dangling items.
-
Never
move
the fan when it is running.
-
Stand
behind the fan with your feet firmly
planted and both hands on the top rail.
-
Never
tip the fan back while running.
-
If
necessary to move the fan (for safety
reasons, like basket flopping around),
hit the kill switch first, then move
it and restart (if directed by pilot).
-
When
signaled by pilot, hit the kill
switch, wait for blade to stop, then
go to opposite side of the fan. Tilt
the fan towards you with a foot on the
base for balance. Move the fan out of
the way and place up by the front tire
of the chase vehicle.
-
Don't
forget to load the fan before leaving
the launch site.
Fan
Hand Signals
Remember:
Different pilots may use a
variety of hand signals for fan
control. These are examples:
-
1/2 Speed: Football halftime signal.
(before hot inflation)
-
Full
Speed: Thumb up (once top is set).
-
Slower:
Thumb down.
-
Stop
Fan: Hand slicing throat.
|
Know where the kill (off) switch is.
|
